Premium UV/LED Screen Printing Ink for Treated PP & PE
A premium dual-curable (UV & LED) ink formulated specifically for flame-treated and corona-treated Polypropylene (PP) and Polyethylene (PE). Delivers extreme chemical resistance and sharp graphics for shampoo bottles, high-end packaging, and labels.
Запросить коммерческое предложение и образцыIdeal for PP & PE Plastic Packaging
Engineered for multi-color automatic and semi-automatic screen printing lines. Solves peeling and chemical degradation issues on low-surface-energy plastics.
Why Choose UV-8300-2 Series?
100% Adhesion Rate
Passes rigorous cross-cut tape tests (1mm spacing) on properly treated PP and PE surfaces with zero peeling.
UV & LED Dual Curing
Highly adaptable photoinitiators allow lightning-fast curing (1-3s) under standard 80w/cm UV lamps or LED systems.
Ultimate Resistance
Immune to cracking, alcohol, alkali (2% NaOH), salt water, and neutral detergents. Perfect for bathroom products.
Global Compliance
Strictly meets EU RoHS and Japan ST Heavy Metal standards. Safe for international export packaging.
Technical & Performance Data
Lab-verified specifications to ensure reliable mass production in your facility.
General Specifications
| Product Code | UV-8300-2 |
|---|---|
| Suitable Substrates | Treated PP & PE (flame/corona treatment required) |
| Finish / Appearance | High Gloss / Paste-like consistency |
| Estimated Coverage | Approx. 75 m²/kg (using 420 mesh PET screen, 75° squeegee) |
| Требования к отверждению | 1-3 seconds (80 w/cm UV lamp) |
| Environmental Standard | Meets EU RoHS & Japan ST Standards |
Laboratory Test Results
| Адгезия (испытание с использованием ленты с поперечным надрезом) | 100% Retained (1 mm spacing) |
|---|---|
| Flexibility | No cracking (2mm diameter, 180° bend) |
| Hardness (Pencil) | 1H (45° x 200g pressure) |
| Устойчивость к алкоголю | No change (Cotton ball, 200g pressure, 100 rubs) |
| Alkali & Water Resistance | No change (1 hour in 2% NaOH / 1 day in tap water) |
| Detergent & Salt Water | No change (3% neutral detergent / 5% NaCl rubs) |
| Overprinting Compatibility | Excellent adhesion (e.g., Blue 502 on White 102) |
* Test Conditions: 1mm thick flame-treated PE sheet, 420 mesh, 75° PU squeegee, tested with 102-Super White & 502-Heliogen Blue (+5% B-5 hardener). Results are for reference; pre-production batch testing is highly recommended.
Standard Base Colors (33 Types)
- 101 Mixing White
- 102 «Супер-белый»
- 201 Лимонно-желтый
- 204 Orange
- 301 Bright Red
- 304 Pink
- 401 Фиолетовый
- 501 Sky Blue
- 502 «Гелиоген Блю»
- 601 Apple Green
- 702 «Супер-черный»
- 901 «Золотой лак»
- ...and more
Transparent & Process Colors
- T-011 Транс-красный
- T-013 Trans Yellow
- T-015 «Транс-синий»
- T-018 «Транс-блэк»
- G-801 Process Red (CMYK)
- G-802 Process Yellow
- G-803 Process Blue
- G-804 Process Black
Рекомендации по подаче заявки
Crucial Surface Treatment
PP and PE must be flame or corona-treated to achieve a surface tension of ≥ 40 dynes/cm². For PP, a chemical primer/treatment solution can also be used.
Proper Ink Preparation
Stir well before use. Add 5-8% UV-SL thinner if the viscosity is too high. Avoid over-thinning to prevent incomplete UV curing.
Настройка экрана и ракеля
Use 420 mesh/inch (or finer) screens and ≥75° hard PU squeegees. Thick ink films will block UV light and ruin bottom-layer adhesion.
Enhancing Water Resistance
Add 5-8% B-5 hardener for extreme water resistance (optimal after 7 days). Mixed ink must be consumed within 8 hours.
Multi-Layer Strategy
Reduce UV lamp intensity for the first color layers to prevent over-curing, ensuring the subsequent layers bond perfectly.
Metallic & Pearl Mixing
Mix 901 Gold Varnish with ~10% metallic powder (≥1200 mesh) + 2% SD-Dot Paste to prevent sedimentation. Use within one week.
Source Directly from China's Leading Ink Manufacturer
Stop dealing with ink peeling on your PP/PE products. Contact our technical team today for wholesale pricing, Pantone matching, and free testing samples shipped globally.
Get Factory Quote & Free Samples