Premium 3D Embossed Glass Ink Series
Engineered exclusively for decorative glass printing. Achieve unique tactile 3D embossed effects with outstanding chemical resistance, flawless adhesion, and strict RoHS environmental compliance.
Request Technical Consultation
Target Application Scenarios
Specifically formulated for industrial and decorative glass that requires highly durable, tactile surfaces that withstand daily wear and harsh cleaning agents.
Luxury Perfume & Liquor Bottles
Perfect for premium cosmetic glassware and high-end spirits packaging. Deliver unique tactile 3D embossed effects that resist high-concentration alcohol and fragrance oils.
Cabinet & Furniture Glass
Deliver premium textured aesthetics for kitchen cabinet doors, wardrobes, and high-end glass tabletops.
Sliding Doors & Lighting
Ideal for frosted, mirrored, or embossed decorative patterns on architectural sliding doors and glass lampshades.
Hardcore Physical & Chemical Performance
Our 3D Embossed Glass Ink matrix is rigorously tested against extreme industrial standards, proving ultimate resilience.
| Test Parameter / Property | Testing Method & Verified Results |
|---|---|
| Environmental Compliance | Fully meets European RoHS Standards (Heavy Metal Free). |
| Adhesion (Cross-Hatch Test) | 3M Tape Peel Test: 100% Retention (No detachment or flaking). |
| Boiling Water Resistance | Submersed in boiling water for 30 minutes: No abnormalities. |
| Acid Resistance | Immersed in 5% H₂SO₄ solution for 24 hours: No abnormalities. |
| Alkali Resistance | Immersed in 5% NaOH solution for 3 hours: No abnormalities. |
| Solvent (MEK) Resistance | Cotton swab with MEK, 500g pressure, 10 rubs: No effect. (After 50 rubs, slight softening occurs, but hardness fully recovers after 1 hour of drying). |
| Alcohol & Grease Resistance | Cotton swab with Alcohol/Salad Oil, 500g pressure, 100 continuous rubs: No abnormalities. |
Standard Mixing & Application Protocol
Precise Mixing Ratio
For optimum performance, mix the base ink with our dedicated promoter. The standard ratio is 100 Parts Ink : 2 Parts D-80 Promoter. Stir thoroughly from the bottom up to ensure uniform resin activation.
Viscosity Adjustment
If the mixed ink viscosity is too high for your mesh count, cautiously add the 3D-UV-300 Thinner. Add only as needed to achieve the perfect flow for 3D raised printing.
Pot Life Management
Once the D-80 promoter is added, the chemical cross-linking begins. The workable pot life of the mixed ink is 6 to 8 hours. Viscosity may gradually increase during printing; minor thinner additions are acceptable during the run.
The Complete 3D Glass Ink Matrix
Choose from our extensive range of base oils, metallics, and transparent colors to achieve your desired aesthetic.
Q-Series: 3D Frosted Base Oils
Includes Q-20 (Large Frost), Q-30 (Medium Frost), Q-40 (Fine Frost), and Q-70 (Pattern Frost). Perfect for simulating acid-etched textures safely.
D-Series: Metallic & Pearlescent
Create luxurious finishes with Mirror Silver (D-100), Fine Silver White (D-210), Satin Gold (D-422), and stunning Chameleon/Magic colors (D-313 to D-320).
T-Series: Transparent Colors
Vibrant, high-clarity transparent inks including Bright Red (T-101), Deep Yellow (T-201), Brilliant Blue (T-300), and Deep Black (T-600).
Specialty Additives & Thinners
Optimize your production with our T-90/D-80 Promoters, 3D-UV-300 Thinner, and specialized Fast-Dry (3D-100) / Slow-Dry (3D-200) solvents.